Top Tips For Easy DIY Sweeper Repair

It may surprise some that many vacuum repairs can be done at home for a fraction of the cost. The reason for this is that in many cases the problem is either a part has come loose, broken, or there is a simple clog.

By checking these things first anyone can save themselves both time and money on having it serviced. Even if the sweeper isn’t broken, these tips can be used to help maintain it and extend its life.

Check For Leaks Or Broken Seals

A loss of suction is one of the more common complaints that prompts people to look into Rainbow sweeper repair. There are several reasons for this including a hole in one of the hoses, a broken seal, or a clog somewhere in the machine.

A visual inspection of the seals and hose should help identify any leaks that might cause a loss of suction. It is best to do this in a brightly lit room or outdoors on a sunny day in order to see clearly. A bright flashlight may also be of use.

Another option is to carefully feel along the hose to see if there are any damaged spots that may be letting air out. If any spots are found, then the hose should be replaced with a new one.

Clean Out Jams, Clogs, And Gunk From Parts

If no holes or broken seals were found, the next thing to check for is whether the unit is clean. There are many parts that may get dirty or jammed, which is why it is important to check all of them from time to time.

The roller brush or attachment nozzle is often the first thing that can become jammed. Clumps of mud, dirt, or even small toys or objects can become lodged in the opening, which can cause it not to pick up dirt as well.

Loose hair may also accumulate on attachments and can become stuck around the bar or belt of the power nozzle. Instead of calling for Rainbow vacuum cleaner repair, this type of buildup can often be cleaned at home.

Photo Credits

The first step to removing a stuck object or hair build up is to make sure that the unit is powered off and unplugged. The hose or attachment should be removed so that it is easier to clean. It may also help to put a plastic bag or newspaper under it to catch any debris.

Most objects will come loose with a little bit of prying with a finger. If they do not, then a small or thin brush can be used to help knock it loose. It is important when doing this to avoid scratching or damaging the attachment.

Once it has been cleaned out, it can be tested to make sure that the suction is working properly again. If it is not, then there may be a clog somewhere else in the attachment or somewhere in the hose.

In order to help prevent these kinds of problems, the unit should be thoroughly cleaned out on a regular basis. Some may do this every time they use it, while others may deep clean the unit once per month to remove any build up.

Replace Or Wash The Filter As Needed

One last easy to do Rainbow vacuum repair is to change out the filter. Accessing the filter is easy, and can be done by following the instructions in the user manual. For most, it involves removing a few small parts to take the filter out.

The filter needs to be cleaned or replaced on a regular basis in order to trap dust and particles effectively. Some filters may be washable, while others are meant to be replaced when they become too dirty or clogged.

Most who do at home Rainbow sweeper repair will opt for a washable filter as they can be reused a number of times. To wash it, they need only to shake loose as much dust as possible then rinse it out throughly in a sink or outside.

Guest Post Author:

Wendy Burns writes for RainVac who can assist you with all your Rainbow Vacuum needs, from Sales to Supplies, specializing in Rainbow sweeper repair.

Speak Your Mind


Spam protection by WP Captcha-Free