7 Steps to Winterizing Your Texas Pool

If there’s one advantage that southerners have over northerners, its year-round sunny and warm weather. According to Current Results Nexus, the state of Texas is ranked as one of the top ten states for having the best weather all year long. As Fall approaches, while those in the northern part of the U.S. gear up for the new season, Texans have extra time to utilize the warm weather. And that means keeping pools open.

While being able to keep your pool open longer is an advantage, it also means that you must keep up with pool maintenance, whether you do it yourself or contact a pool cleaning service in Austin or the surrounding areas. But, as time ticks down to the winter months, most residents decide to close their pool until the hot weather returns in May. Not only are temperatures in Texas usually not high enough to go swimming, but the high temperatures can promote bacteria and algae growth.

If you plan on closing your pool this winter, there are important steps you should follow to properly close your pool and ensure it remains in functioning condition.

  1. Skim and vacuum your pool regularly: While your pool is still in use you should continue to skim and vacuum your pool. Doing so will remove dirt and insects that end up in the water, making it safer to swim in. You should also give it a good skim and vacuum prior to closing it.
  2. Shock your pool: Throughout the summer, you should shock your pool with a small amount of chlorine each week to kill harmful bacteria. Roughly three to seven days prior to closing your pool, you should shock it. This way you can ensure that the bacteria is removed and allow the chlorine level to settle.
  3. Lower the water level: Since you will not be using your pool and because rain can makes its way into the pool, you should lower the water level.
  4. Gradually reduce filter time: As time draws to officially close your pool, you should gradually reduce the filter time. Run it a few hours throughout the week to skim bacteria and algae. When you’re ready to officially close the pool, you will need to clean out the filter by back washing it.
  5. Disconnect the pump: After your filer is clean, you can shut down and disconnect the pump. Be sure to store it in a safe place to prevent damage or harm.
  6. Clean around the pool: In addition, you should clean around your pool. This includes removing any ladders, pool cleaners or furniture and placing them in a safe place.
  7. Cover your pool: Lastly, inspect and clean the pool cover prior to covering it. Placing a pool cover over it will help keep dirt and other outside components out of the pool, and protect the pool from potential damage.

If you don’t have the necessary tools or time to properly close your pool, you should contact your local pool cleaning service in Austin and the surrounding areas. These professionals are equipped with the necessary tools and chemicals to carefully clean your pool and in a timely manner. Also, when the time comes to open your pool, heavy maintenance will be needed to ensure your pool is thoroughly cleaned and safe to swim in.

Jillian Johnson is a professional content writer with an interest in writing about home improvement and related topics. Follow her @MissWritey.

Speak Your Mind

*

Spam protection by WP Captcha-Free